WW200 Wastewater Concrete and Coating
WW200 Wastewater Concrete & Coating is an acid-resistant, low-permeability solution for manholes, pipe linings, and wastewater infrastructure, offering quick curing and lasting protection.
Geopolymer Solutions
Sustainable Concrete and Fireproofing
A-Series Acid Resistant Mortar
Cold Fusion Concrete® A-Series Mortar is an acid resistant mortar with resistance to most chemicals. It is designed to resist all acids except hydrofluoric.
Acid Resistant Mortar Features & Benefits
A-Series Mortar is a sustainable, environmentally friendly, acid resistant mortar based on our ultra high performance Cold Fusion Concrete.
- Resistant to all acid exposures at concentrations ranging from 0.1-percent to 98-percent
- Resistant to all acids except hydrofluoric
- Resistant to hydrocarbons, chlorides, and sulfate exposure degradation
- Resistant to freeze and thaw cycles
- Resistant to solvent exposure
- Can be colored
- Micro fiber reinforced
- Offers Improved corrosion protection
Acid Resistant Mortar for a Wide Range of Applications
A-Series Acid Resistant Mortar is successfully utilized in the petrochemical, fertilizer, food & beverage, mining, military, and oil & gas industries due to its chemical resistance and complete resistance to chloride and sulfate attack.
- Ideal for interior and exterior applications
- Performs in both hot and cold climates
A-Series Acid Resistant Mortar Testing and Compliance
A-Series Acid Resistant Mortar Cold Fusion Concrete is tested for acid resistance in various acids to ensure protection against chloride, sulfate, hydrocarbon, and solvent degradation.
| A-Series Acid Resistant Mortar | Test Method | Low Range | High Range |
| Bulk Density, PCF | ASTMC138 | 133 | 138 |
| Compressive Strength, PSI | ASTMC579 | 7500 | 10000 |
| Bond Strength, PSI | ASTMC321 | 1780 | 2000 |
| Tensile Strength, PSI | ASTMC307 | 3400 | 5250 |
| Young’s Modulus, PSI | ASTMC469 | 4.77 X 106 | 6.8 X 106 |
| Poisson’s Ratio | ASTMC469 | 0.02 | 0.25 |
| Coefficient Of Expansion, 10-6in/°F | 1.86 | 3.05 | |
| Max. Service Temperature, °F | 1000 | 1600 | |
| Water Absorption, % | ASTMC413 | 0.04 | 0.11 |
| Working Time, Minutes | ASTMC308 | 120 | 180 |
| 45% Sulfuric Acid, % Mass Loss | ASTMC279 | 1.00 | 2.20 |
| 57% Nitric Acid, % Mass Loss | ASTMC279 | 0.00 | 0.00 |
| 75% Hydrochloric Acid, % Mass Loss | ASTMC279 | 0.00 | 0.00 |
| 75% Acetic Acid, % Mass Loss | ASTMC279 | 0.50 | 0.88 |
| 98% Sulfuric Acid, % Mass Loss | ASTMC279 | 0.00 | 0.00 |
| 85% Phosphoric Acid, % Mass Loss | ASTMC279 | 0.00 | 0.00 |
| 50% Hydrofluoric Acid, % Mass Loss | ASTMC279 | 5.00 | 24.80 |
A-Series Acid Resistant Mortar Product Details
Packaging, Shelf Life and Coverage
- Supplied in 5 gallon Ready-to-Use Buckets
- 2-year shelf life
- Install approximately 100 bricks per 5 gallon container
Directions for Use
Prep: Pour the desired amount of dry mortar into a bucket or wheelbarrow. Place unused mortar mix back into container and seal. Add water and mix. Use from 8% to 13% water-based upon the mass of dry mortar.
How To Apply: Fill the joints by scooping mortar onto a brick, trowel, or hawk. Hold it evenly with a bed joint, and push the mortar against the back of the joint with the tuck-pointing trowel. Eliminate voids with a few slicing passes of the trowel’s edge, then add more mortar until the joint is filled.
Cleanup: Use soap & water when cohesive.
NOTE: A-Series Mortar jackhammers when properly cured.
Is A-Series Mortar right for your project? Please contact our team for assistance.
Training & Support
Our hands-on approach to training and support sets us apart, providing significantly better service than our competitors. We believe in empowering you with comprehensive training on our products before you apply them, ensuring successful and reliable outcomes.
Related Products
ST200 Acid and Mold Resistant Stucco
ST200 Stucco is an acid and mold-resistant solution for commercial and residential facades, offering quick curing, easy application, and superior durability.
SL200 Self-Leveling Concrete
SL200 Self-Leveling Concrete is a durable, acid-resistant solution ideal for floor leveling and surface finishing in harsh industrial environments, offering rapid curing and minimal finishing.
English 
Spanish 
Dutch 
French